営業窓口を探す

営業窓口を探す

トピックの検索
言語の変更

HAIMER ニュース

  • 03-September 2019: Shrinking Tools - but...

    HAIMER presents its Industry 4.0-ready and network compatible Power Clamp i4.0 shrink fit machine line. The ergonomic shrinking stations with their patented NG coil are...

  • 03-September 2019: HAIMER DAC digitalizes...

    DAC (Data Analyzer and Controller) is the name of the tool management system developed by HAIMER, which enables a consistent exchange of tool data and connects the entire...

  • 03-September 2019: Automatic tool shrinking...

    The spectrum of tool presetters from HAIMER Microset ranges from the manual basic unit to the fully automatic high-end version VIO linear toolshrink, which also handles the...

  • 23-July 2019: EMO 2019 HAIMER社ブースの紹介:...

    ハノーバーのEMO 2019(ホール4、ブース番号 E16)で、HAIMERグループは、最新の工具管理の仕組みを紹介します:高品質で信頼性の高いコンポーネント、一貫したデジタル化によるロボットアームでの完全自動工具プリセッター

  • 17-July 2019: Girls in typical “men's...

    In an interview, Lena Dempfle (metal cutting mechanic) and Anja Breitsameter (industrial mechanic), both HAIMER apprentices in the technical-industrial field, tell about...

  • 21-June 2019: Interplay of quality and...

    Optimized tool management through integrated process chain - From the shrink fit chuck to the presetting device - aerospace supplier HEGGEMANN relies on consistent HAIMER...

  • 03-May 2019: HAIMER new premium...

    Igenhausen, 02 May 2019 - Haimer GmbH, Igenhausen, the world's leading precision supplier of system solutions around the machine tool in metal cutting, will be the new...

  • 30-April 2019: Apprentice language...

    Igenhausen, 13-April 2019 - As part of an Erasmus+ program and thanks to the commitment of the vocational school Aichach some of our apprentices had the opportunity to visit...

  • 02-April 2019: 60% higher productivity...

    Duo-Lock™ modular tool system enables precise o-ring countersinking

  • 01-March 2019: Increased capacity leads...

    In 2018, the Haimer GmbH was able to increase its sales numbers significantly by 18%. An important foundation for further growth is the new, additional production plant in...

  • 30-November 2018: Convincing performance...

    The target oriented use of tool holders provides process improvements and cost benefits

  • 28-September 2018: AMB 2018 Review: Tool...

    With the slogan “HAIMER i4.0 – Connected to the future“ the HAIMER Group demonstrated at AMB 2018 how medium-sized companies can set up their tool management for the future....

  • 29-August 2018: ボーイング社ポートランド工場とハイマー社との提携関...

    これによりオレゴンのスキャプースにある施設内のOMIC研究開発拠点でのパートナーが20社となる

  • 27-July 2018: IMTS & AMB Preview:...

    Digitization and Industry 4.0 require a seamless flow of data in production. The HAIMER Group will be showing how digital solutions for tool management can look like at IMTS...

  • 30-May 2018: Process-secure tooling...

    If you want to take advantage of digitization in the production environment, you have to ensure the continuity of data, a seamless data flow. HAIMER, system provider for...

  • 19-April 2018: Interface for...

    Large-scale mold maker relies on HAIMER technology

  • 14-March 2018: 切削工具の締め付け: 安全かつ高能率

    ハイマー社切削工具の抜け防止システム Safe-λock™セーフロック、はまさに産業界の事実上の標準になりつつある。

  • 09-March 2018: VDMA Bavaria: Claudia...

    Claudia Haimer, Managing Director and founder of HAIMER GmbH in Igenhausen, previously Deputy Chairwoman of VDMA Bavaria, was elected as the new Chairwoman of the Board of...

  • 25-February 2018: HAIMER at GrindTec 2018...

    During GrindTec 2018, the international Trade Fair of grinding technology in Augsburg, HAIMER, European market leader for clamping and balancing technology, will present the...

  • 31-January 2018: HAIMER - Clamping...

    HAIMER is now also offering new tool clamping solutions for turning and rotary transfer machines. Amongst these solutions are the HAIMER ER 16 and ER 25 shrink fit collets...

  • ER Shrink Collets are also suitable for turning machines (e.g. with driven tool holders). The Shrink Collets (available in different lengths) can optionally be equipped with Cool Jet slots and thus ensure even more process reliability and maximum cooling.

    15-January 2018: Metav 2018 Preview...

    With METAV 2018, Düsseldorf will once again become the workshop city of the metalworking industry. There, the exhibitors and visitors can talk about the latest technologies,...

  • 11-October 2017: 40 Years HAIMER quality...

    Here you can watch the entire film directly ... The sneak preview took already place during our open house events in September - now we do not want to hold it back from you...

  • 写真は、航空機メーカー、ピラタス社のパトリック・オーデルマット氏(左)、ワルター・ダス氏(中央)とトビアス・フォルカー(ハイマー社のツールホルダー専門家)の3人で、大変な量の金属切削分野での協力関係の成功に満足です。

    15-May 2017: IDチップ飛出し事故・・・工程の安全性にツールホル...

    2016年にピラタス・エアクラフト社はアルミニウムで作られた機体構造部品を加工する新しい製造システムを導入しました。高速でのミーリング加工時において要求される加工面の品質と精度を満たす為にピラタス社はハイマー社が提供するソリューションにこれまで通り信頼を寄せてきました:それはハイマー社の広範囲ツールホルダーからの選択肢と焼きばめ装置とツールバランス...

警戒リスト